| Customization: | Available |
|---|---|
| Application Field: | Anti-Crack,Cement Reinforcement |
| Colour: | White |
|
Still deciding? Get samples of US$ 50/kg
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Briture PP Fiber Fibrillated Mesh form is made of 100% virgin homopolymer polypropylene with form of mesh, it is mainly used for concrete and mortar reinforcement, anti-cracking
| Increase seepage resistance | Prolong endurance | Improve steel protection |
| Increase cracking resistance | Increase fire resistance | Strengthen spurt & fatigue |
| Improve tensile, bending & folding strength | Improve plastic deformity | Strong acid & alkali resistance and good endurance |
1. Length : Generally, the proper length of the fiber added into concrete is 20 mm, and in the spray concrete is 10mm.
2. Ratio Design: Usually the proper amount of fiber to concrete is 0.9kg/m3 , and the water-proof layer of the bridge requires 1.35-1.8kg/m3, and the spray concrete in the tunnel is also the same and other materials remain the same. The ratio of fiber and concrete can be determined by tests for special purposes. The fiber has better effects on the concrete with active compound materials, such as silicon ash, coal powder, ground slag and zeolite powder.
3. Mixer Adoption: Double-axle horizontal compelling mixer is better and self-dropping cylinder mixer can be used, too.
4. Mixing Process: Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as usual, but the stirring time should be properly prolonged to make fiber completely mixed.
5. Stirring Time: The purpose of the stirring is to make fiber fully spread into monofilament or the net fully spread, so generally the stirring time is 2-3minutes after the addition of polypropylene fiber-mesh.
| Raw Material | 100% virgin polypropylene | Fiber type | Fibrillated Mesh |
| Crack Elongation (%) | 10 min. | Melting Point (ºC) | 160 |
| Density | 0.91 | Tensile Strength (Mpa) | 560 min. |
| Fiber Diameter (mm) | 0.035 | Fiber length (mm) | 12,19,38,54... |
| Elastic Modulas (Mpa) | 3500 min. | Width (mm) | 5 |
| Alkali & Acid resistance | Strong | Water-Absorbency | No. |
0.9kg or 1kg net each PE bag or paper bag
PP Fiber Twisted Bunchy Form PP Macro Fiber Embossed Steel Fiber
PP Macro Fiber Wave Form Brass Coated Micro Steel Fiber Glass Fiber
){kind=link}