After-sales Service: | None |
---|---|
Type: | Concrete Admixure |
Raw Material: | PP/PE |
Samples: |
Single sample supply is 1kg
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
40-54mm PP Fiber Twisted Bunchy Form 500t for Concrete Reinforcement
PP fiber twisted beam forming is a kind of concrete additive, using polyolefin as raw material, its rough surface is processed by special parallel thread extrusion and twisting process. It is often used to strengthen concrete instead of steel fiber
high fracture strength, good dispersion and strong binding force
1. Mixing ratio: It is generally recommended that the concrete content per square meter should be more than 2.7kg (volume ratio 0.3%), and the reinforcement should be 5.5kg
2. Length: The usual crack resistance requires a fiber length of 54mm
3.As shown. Mix ratio: The proportion of concrete usually does not change, in order to crack resistance requirements, it is recommended that the polymer fiber and PP fiber mesh in the form of 1:1 volume ratio (per square meter of cement concrete 0.9kg fiber mesh) used in combination.
4. Use: dual axis horizontal forced mixer preferred.
5. Mixing process: the gravel, fiber, sand in turn into the blender. After the fiber is fully developed, add cement and water and stir normally. The added material can be added in the same way as ordinary concrete, but the mixing time needs to be extended appropriately to ensure that the fibers are fully mixed.
6. Styling and maintenance: no special requirements, can be 30 seconds along the vibration time, the maintenance method is the same with ordinary concrete.
Raw Material | PP/PE | Density (g/cm3) | 0.91 |
Elastic Modulus (Mpa) | >=5000 | Length (mm) | 40,50, 54 |
Equivalent Diameter (mm) | 0.7+/-0.05 | Break Tensile Ratio (%) | 15min. |
Break Strength (Mpa) | >=600 | Alkali & Acid resistance | Excellent |
Brass Coated Micro Steel Fiber Cellulose Fiber Steel Fiber
Glass Fiber PP Macro Fiber Wave Form PP Macro Fiber Embossed
Suppliers with verified business licenses