PA hot melt web BWPA116
The BWPA-116 hot melt mesh film is a non-woven fabric-like hot melt adhesive product, which can be conveniently operated continuously or intermittently. This product can be widely used for bonding various types of fabrics, paper, polymer materials and metals. The weight per square meter ranges from 8 to 120 grams.
Typical uses
- Fabric bonding of garment industry
- The bonding of fabric foam and sheet for automobile industry
- Indoor supplies fabric bonding
- Multilayer bonding of filter materials
- Luggage industrial fabric bonding
- Building decoration fabric bonding
Physical and chemical properties
| Ingredient |
Copolyamide |
| Exterior |
White |
| Melting range (ºC) |
110-120 |
| Melt index (MI) (GB/T 19466.3) |
35 |
Application characteristics
| Bonding parameters (reference value) |
| Ironing temperature (ºC) |
150 |
| Pressure (MPa) |
0.2 |
| Time (s) |
10-20 |
- Extremely strong adhesive ability and washing resistance
- High molecular strength, not easy to plasticize and deform
- High bonding strength to fabric and foam
- Good air permeability, not easy to aging and yellowing
Note: According to the different bonding materials, the pressing conditions need to be adjusted appropriately.
Precautions
Keep away from children.
In case of accidental contact with eyes, rinse immediately with water and seek medical attention if serious.
If you accidentally touch the skin, rinse with water.
It is recommended to use in a well-ventilated place.
For product safety information, please refer to the MSDS of this product.
Product specification
Weight 30gms, or customized according to customer requirements.
Reference usage
1. Hot-melt adhesive requires hot-pressed bonding.
2. If two thin flexible materials are to be bonded, stack the material 1 / hot-melt adhesive film / material 2 together, use a flat pressing machine or a flat laminating machine for hot pressing bonding, reference temperature 150 ºC, pressure 0.2MPa, time 12 seconds, the specific pressing conditions need to be adjusted according to the actual situation of the customer.
3. If it is a thick rigid material, you can lay the hot melt adhesive on the surface of the thick rigid material and bake them together in an oven at 150 ºC. After the hot melt adhesive film is completely melted, the two materials are bonded together. The baking temperature can be adjusted according to the actual situation of the customer.
4. Thin rigid materials can also be pressed with a flat pressing machine, such as the bonding of thin aluminum plates and non-woven fabrics.
Transportation and storage
Hot-melt adhesives are non-dangerous goods. They should be handled with care during transportation to prevent sunlight, rain, heat, and heavy pressure. Iron hooks are prohibited during loading and unloading to protect the integrity of the packaging. The product must be stored in a cool, ventilated, dry place, protected from sunlight, rain, high temperature, etc., and the height of the pile should not exceed 3 layers. The storage environment should be stored in a cool and dry place at 0-30 ° C (humidity ≤70% RH).
Storage period: 12 months from the date of production.
Product Description
){kind=link}