Glued Hooked End Steel Fiber for Industrial Floor Tunnel Shotcreet and Dam

• Customization: Available
• Application: Mortar Reinforcement, Shotcrete
• Type: End Hooked Glued Steel Fiber
• Model NO.: steel fiber
• Product Name: Hooked End Steel Fiber
• Tensile Strength: 1150 MPa Min
• Length: 60mm
• Diameter: 0.9 mm
• Transport Package: 20kgs Net Per Bag
• Specification: 30mm-60mm
• Trademark: Briture
• Origin: China
• HS Code: 7326909000
• Production Capacity: 2000mts / Year
• Package Size: 110.00cm * 110.00cm * 180.00cm
• Package Gross Weight: 1020.000kg

Product Description

Hooked End Steel Fibre
(Loose / Glued)

Product Description

Hooked end steel fibre is made of cold-drawn wire. In the concrete mixture, add right amount steel fibres can be mixed into a kind of special jetting as well as casting concrete, namely steel fibre reinforced concrete. Compared with general concrete, steel fibre concrete has a great improvement in tensile strength, flexural strength, abrasion resistance, impact resistance, fatigue resistance, toughness, crack resistance and antiknock performance.

 

Function

1. Improve structural strength
2. Reduce steel reinforcement requirements
3. Reduce crack widths and control the crack widths tightly, thus improving durability
4. Improve impact- and abrasion-resistance
5. Improve freeze-thaw resistance

Application

1. Mortar reinforcement
2. Ground, bridge, highway pavements dam
3. Railway sleeper
4. Shotcrete, tunnel and mine

Features

1. Improve structural strength
2. Reduce steel reinforcement requirements
3. Reduce crack widths and control the crack widths tightly, thus improving durability
4. Improve impact- and abrasion-resistance
5. Improve freeze-thaw resistance

specification

 

Type	Diameter(mm)	Length(mm)	LD Ratio	Tensile strength
80/60	0.75	60	80	1100Mpa min
65/60	0.90	60	85	1000Mpa min
80/50	0.62	50	80	1100Mpa min
65/35	0.55	35	65	1200Mpa min
80/60	0.75	60	80	2000Mpa min
65/60	0.90	60	65	1800Mpa min
65/60	0.90	60	65	1800Mpa min

 

Guidelines for use

1. Dosage: depend on the application and minimum dosage range is 20kg/m3-70kg/m3.
2. Mixing: put sand and stones into the hopper. While turning the sand and stones into the hopper, mix the proper amount of loose steel fiber, and then add the cement.Hang the sand, stones, steel fibers, and cement from the hopper into the mixing table and dry mix for 2 minutes, then add water to mix for 2 minutes. Glued steel fiber should be added after water mixed to dissolving glue.
3. Put the evenly mixed fiber concrete into the carriage and transport it.
4. The concrete pouring and laying should be tamped and compacted.

Packaging & Shipping

20kg/bag, 1000kg/pallet, 24MT/20' container. Other packing way according to customer's requirements.

Certifications